|
| |
| |
| |
 |
 |
 It
can be used for water-soluble or water-insoluble
coolant filtering of all machine tools.
It
can be used in rough grinding and finishing line
of all nonmagnetic machine tools.
 (However
it is just available in the chip, whose size is
less than 200mm) |
| |
 |
| It has a integral structure
combining chip CONV' and drum. Dirty coolant induced
from machine is separated and filtered to chip and
clean water by drum filter. Clean water is sent
to clean tank and resupplied to machine and chip
and other floating matters that did not pass drum
are discharged to chip box by CONV'. |
| |
 |
Because
it has an integral structure combining CONV' and
drum, the secondary filtering is not necessary,
installation area is small and running cost is low.
In
order to prevent mesh media of drum from being clogged,
washing unit is attached so it is possible to use
mesh media for a long time.
If
specially manufactured magnet plate is installed
in CONV', steel and FC chip can be filtered. |
| |
 |
| COOLER,
cutting oil sterilization unit and AERATION unit. |
| |
 |
|
|
| |
| |
